The wireless setup of your Canon TS3722 printer is easy and guarantees printing without any interface issues from different devices. Regardless if the device is a laptop, tablet, or smartphone, these steps can be easily followed for Canon TS3722 setup.

1. Preparation and Unpacking

Go through the steps for wireless printer setup, first by unpacking the Canon printer and taking off all the packing. Next connect it to the electrical socket to switch it on. Check if your Wi-Fi connection is stable.

2. Install Ink and Load Paper

Place paper in the input tray and put the ink cartridges supplied into the printer. Follow the guidance displayed on the printer's control panel.

3. Connect to a Wi-Fi network

To begin the wireless setup, press the wireless button on the printer until the wireless indicator light starts to flash. After that, press and hold the Direct button until the Wi-Fi lightbulb turns on. This indicates that the printer has a wireless connection.

4. Inkjet app installation for the Canon SELPHY/PRINT

On your phone or tablet, download the Canon PRINT Inkjet/SELPHY app from the App Store or Google Play store. Launch the application and adhere to the prompts displayed on the screen to find and link up your printer to the Wi-Fi network.

5. Final Configuration of the PC

To download the drivers needed for the printer installation on a PC, go to the official ij.canon.start page. Launch the installer and carry out the instructions to connect the Canon TS3722 to the same wireless network.

Help with problems

• Check if the printer and your device are on the same wireless network.
• If the connection is disrupted, try restarting your network or printer.
• Enhance the printer's performance by updating its firmware through the Canon PRINT app.

You can now print, scan, and copy wirelessly with Canon TS3722 after the wireless setup instructions are completed. Enjoy the convenience of the Canon wireless printer that is set up and ready for your printing needs.

To find out more about the Canon wireless printer setup, visit our website.